EIBACH / BILSTEIN ADJUSTABLE HD (heavy duty) BODY LIFT SPRING & SUSPENSION KIT ONLY FOR CALIFORNIA (ALL) OR FULLY LOADED VANS (REAR AXLE, CLEAR WEIGHT MINIMUM 1000KG) VW T5, T6 AND T6.1

€2.020,00
Article number: VW-B6-KO-LIFT-4

EIBACH / BILSTEIN ADJUSTABLE HD (heavy duty) BODY LIFT SPRING & SUSPENSION KIT ONLY FOR CALIFORNIA (ALL) OR FULLY LOADED VANS (REAR AXLE, CLEAR WEIGHT MINIMUM 1000KG) VW T5, T6 AND T6.1

Adjust to the millimeter precise on the rear part the height and correct the opctial appearance, also adjust between right + left!

For 4Motion, we recommend to order the TMP-DIFF set in addition!

Adjustable complete lift kit
In order to offer a further improvement in driving behavior and an increase in the downstop, we have had this pleasant, sporty and comfortable complete suspension kit developed, which sets new standards in terms of driving dynamics for lift-up suspensions. With the approx. + 35mm perfectly matched Eibach lift coil springs and the extended and reinforced Bilstein B6 COMFORT shock absorbers, which at the rear axle with Monotube technology bring the superior Bilstein driving behavior even to lifted chassis. Despite the higher center of gravity, the dampers even help to reduce the body roll compared to the standard chassis. With millimeter-precise adjustment options on the rear axle to avoid the typical "sagging look" in the rear and the difference in height between right and left and of course for optimized driving and braking behavior for vans with permanently high loads at the rear. Ideal for all California models. Furthermore, to offer the best possible damping force off-road. Durability, settling strength and optimal driving behavior for lifted vans. In contrast to Bilstein B6 yellow with approx. 10-15% more comfortable damping in rebound and compression for a pleasant driving behavior in everyday life.
For vehicles with full equipment or DSG or a long wheelbase, the lift can be significantly reduced due to the additional weight on the front axle and we therefore recommend the TWIN MONOTUBE PROJECT LIFT COIL-SUSPENSION LIFT KIT, which can also be screwed higher at the front!
In vehicles with DCC, the DCC must be properly shut down after the shock absorber has been replaced. Developed + made by Eibach Germany + Bilstein Germany!


Please chose the right option (front shocks):

- Standard version with clamped fastening for VW T5, T6 and T6.1
or

- Heavy-duty screwed attachment with laches

 

0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »