Foldable solar panel holder

Foldable solar panel holder

Quick to align with the sun and removable for 'shadow parking'.

Not just a simple way to attach the solar module to the roof rack:

you can use the quick, tool-free setup to take advantage of the last rays of sunshine. And if you ever park in the shade again, the module can be easily removed and placed a few meters away in the sun.

Mounting system for solar modules on vehicle roofs, camping vehicles, travel vehicles, boats.

The 4 movable corner mounts allow an optimized alignment of the solar module to the sun and thus a significant increase in efficiency: the projected area is increased and the reflections are reduced.

It can also be removed in seconds to set up further away from the vehicle or outside of the journey.

Metal parts 2mm stainless steel, rubber joints EPDM with stainless steel custom-made! Durability: VERY long, there has not been a single complaint in 10 years.

Installation angle depending on module dimensions 45-60°.

Version “normal” for module lengths up to approx. 1.5m (length of installation bracket approx. 0.7m)

Load capacity approx. 20kg. For larger modules, additional support of the longitudinal edges using rubber buffers is strongly recommended when setting up.

Disclaimer on the part of the manufacturer regarding assembly by external companies and by the customer himself

Disclaimer on the part of the manufacturer in the event of accidents and damage resulting from the use of the product due to the non-definable conditions of use and loads

Contents:

4 pre-assembled corner pieces mad of stainless steel (triangular base piece + rubber joint, angular module with spring)
1 M10 support bracket with rubber protective hose, pre-bent in the middle
1 center foot with ball splint made of stainless steel + rope
mounting kit (screws and small parts)